Search results for "Grain boundary diffusion coefficient"
showing 10 items of 12 documents
Initial chemical transport of reducing elements and chemical reactions in oxide cathode base metal
2002
Abstract In the present work, the formation of compounds associated to the diffusion of reducing elements (Mg and Al) to the nickel surface of a one-piece oxide cathode has been studied. Those compounds have been evidenced after the annealing steps at high temperature performed on cathode base metal prior to the emitting coating deposition. Therefore, they form the “initial” interface between the nickel and the coating, in other words, the interface existing at the beginning of cathode life. Extensive analysis to characterize the nickel base prior to coating deposition has been performed by means of scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDX), …
Mobility, interdiffusion, and tracer diffusion in lattice-gas models of two-component alloys
1989
The transport properties of lattice-gas models of alloys with two particle species are studied. The numbers of the particles and vacancies are conserved, and the two particle species have different exchange rates with the vacancies. The mobility and interdiffusion is described by the linear Onsager theory of transport. The Onsager coefficients are estimated from numerical simulations of the mobilities. A recently proposed relation between the Onsager coefficients of the random-alloy model is verified. The interdiffusion of the two species is directly monitored in the simulations; it is well described by the estimated Onsager coefficients. The results on interdiffusion are compared with simu…
Pressure solution compaction of sodium chlorate and implications for pressure solution in NaCl
1999
Sodium chloride (NaCl) has been extensively used as a material to develop, test and improve pressure solution (PS) rock deformation models. However, unlike silicate and carbonate rocks, NaCl can deform plastically at very low stresses (0.5 MPa). This could mean that NaCl is less suitable for use as an analogue for rocks that do not deform plastically at conditions where PS is important. In order to test the reliability of NaCl as a rock analogue, we carried out a series of uniaxial compaction experiments on sodium chlorate (NaClO3) at room pressure and temperature (P‐T) conditions and applied effective stresses of 2.4 and 5.0 Mpa. NaClO3 is a very soluble, elastic‐brittle salt, that cannot …
(La0.8Sr0.2)(Mn1−yFey)O3±δ oxides for ITSOFC cathode materials?
2005
The oxygen transport properties in (La 0.8 Sr 0.2 )(Mn 1-y Fe y )O 3±δ (LSMF) with various iron contents y = 0, 0.2, 0.5, 0.8 and 1 were determined by the IEDP technique. Both oxygen diffusion and surface exchange coefficients were found to be greater for y = 0.8 and 1 than those of LSM (y=0). Moreover, for y ≤0.5, grain boundary diffusion was the rate limiting step especially at lower temperatures. Thus, in the LSMF perovskite materials, the oxygen diffusion via oxygen vacancies is enhanced by Fe. The LSMF electrical performances were measured by impedance spectroscopy. Compared to LSM and LSF (y= 1), porous LSMF cathodes with y= 0.2-0.8 exhibit poor electronic conductivity: Fe, by reducin…
Finite element simulation of diffusion into polycrystalline materials
2008
Diffusion in polycrystalline materials is investigated by means of numerical finite element simulations for constant source conditions. The grain boundaries are assumed to provide fast diffusion paths. Main emphasis is put on situations that typically occur for nanocrystals, viz. on situations in which (i) the diffusion length is significant compared with grain size, (ii) the influence of boundaries that are parallel to the surface become important in addition to the perpendicular ones. Furthermore, we treat the influence of blocking space charge layers sandwiching the core pathways and thus channeling grain boundary diffusion.
Effects of Pressure, Temperature, and Particles Size on O2 Diffusion Dynamics in Silica Nanoparticles
2013
The O2 diffusion process in silica nanoparticles is experimentally studied in samples of average radius of primary particles ranging from 3.5 to 20 nm and specific surface ranging from 50 to 380 (m2/g). The investigation is done in the temperature range from 98 to 177 °C at O2 pressure ranging from 0.2 to 66 bar by measuring the interstitial O2 concentration by Raman and photoluminescence techniques. The kinetics of diffusion can be described by the Fick’s equation with an effective diffusion coefficient depending on the temperature, O2 pressure, and particles size. In particular, the dependence of the diffusion coefficient on the pressure and nanoparticles size is more pronounced at lower …
Relation between grain size and hydrogen diffusion coefficient in an industrial Pd–23% Ag alloy
1999
Abstract The diffusion mechanism of hydrogen in an industrial cold worked Pd–23% Ag alloy is investigated according to its grain size. The microstructural parameters are determined by X-ray diffraction analysis and the diffusion parameters are determined using the galvanostatic electrochemical permeation technique. Two diffusion mechanisms are displayed. For apparent grain size below 40 nm the hydrogen atoms diffuse in the grain boundaries. For grain size above 100 nm, an intergranular diffusion mechanism occurs. For intermediate grain size both mechanisms coexist. Furthermore, the diffusion in the grain boundaries is not faster than the diffusion in the bulk, as generally observed for pure…
Effective diffusion coefficient and diffusion-controlled reactions in insulating solids with defects
1995
Abstract The expressions for effective diffusion coefficient are obtained in the mean field approximation for two-phase system for spatial dimensions of 1, 2 and 3. The existence of potential barrier for diffusion on the phase boundary was taken into account via the boundary conditions. Obtained formulae could be applied in the theory of diffusion-controlled reactions and for interpreting the experimental data on defect diffusion in two-phase media.
Diffusion of Oxygen in Thermally Grown Oxide Scales
2009
High temperature reactivity of materials under oxidizing atmospheres is based on the formation of protective oxide scales. The protectiveness is obtained when the thermally grown oxide scales are dense, continuous and adherent to the metallic substrates (even during thermal shocks); as a matter of fact, the growth of the scale has to be governed by diffusion of species across the growing scale. The diffusing species are coming from the substrate (metallic ions) and/or from the oxidizing atmosphere (oxygen ions). The understanding of growth mechanisms can be reached by making two stage oxidation experiments, using oxygen isotopes. The experiment consists in oxidizing first the metallic subst…
Numerical Determination of Intrinsic Diffusion in Fe-Cr-Al Systems
2010
The intrinsic diffusion coefficients in diffusion aluminide coatings based on Fe-30Cr were determined at 1000oC. The diffusion fluxes were given by the Nernst Planck formulae and the Darken method for multicomponent systems was applied. This paper summarizes some numerical results to determine the composition dependent diffusivities in Fe-Cr-Al systems. The method presented in this study to obtain average intrinsic diffusion coefficients is as an alternative to the Dayananda method. Our method based on empirical parameters allowed us to predict the concentration profile during the interdiffusion process.